Refurbishment
Nutrient concentrate for the biological remediation of oil-contaminated soil – in situ and on site
Item number 8445
PACKAGING & EQUIPMENT
Personal advice · No-obligation quote · Direct from the manufacturer
AT A GLANCE
Specially developed to accelerate the biodegradation of hydrocarbons in the soil.
It can significantly reduce remediation times compared with untreated areas.
For the biological remediation of oil-contaminated soil directly on site.
Supports the soil’s natural regeneration.
FMO Soil Remediation is a nutrient concentrate for the biological remediation of oil-contaminated soil – in situ and on site. It has been specially developed to accelerate the biological degradation of hydrocarbons in the soil and supports the soil’s natural regeneration.
Areas of application
Soil contaminated with oil following leaks and accidents (e.g. heating oil tanks, petrol stations, building sites), landfill sites, riverbanks and beaches, lawns and green spaces – in the case of mineral oil hydrocarbons (MKW) such as petrol, diesel, heating oil, kerosene and engine oil.
Application
Dilute FMO Soil Remediation with water to form a working solution (9–17 per cent, maximum 20 per cent) and apply evenly to the contaminated soil using a watering can, sprayer or sprinkler system; keep the soil moist. The quantity and number of applications depend on the level of contamination (technical data sheet). Check the results after 2–3 weeks by means of a laboratory analysis and, if any residual contamination remains, apply the next instalment.
Effect
FMO soil remediation can significantly reduce remediation times compared with untreated areas. No CLP classification – free from hazard pictograms.
Direct: The treatment solution supplies the microorganisms present in the soil with nitrogen and phosphorus (nitrate-free). The alkyl polyglycosides it contains emulsify the oily pollutants, making them more readily available to the microorganisms.
Next: The oil-degrading bacteria multiply and break down the hydrocarbons into carbon dioxide and water. This can significantly reduce remediation times compared with untreated areas. Afterwards, the natural balance of soil organisms is restored.
We will send you the technical data sheet and safety data sheet by email on request.
Request data sheetsAPPLICATION
Shake FMO Soil Remediation well before use and dilute with water to form the application solution (maximum 20 per cent). Apply the solution evenly to the contaminated soil using a watering can, sprayer or sprinkler system, and keep the soil moist. Quantity and application rates: see detailed application instructions (TDB). Check the results via laboratory analysis after 2–3 weeks and, if any residual contamination remains, apply the next instalment.
Dosage: 9–17 per cent – application solution not to exceed 20 per cent. Application rate: 0.42 g FMO Soil Remediation per g of hydrocarbon (in three instalments); see detailed application instructions. Concentrate in the working solution
We will advise you personally on dosage, packaging and quantity – and send you a no-obligation quote.
Product information
Refurbishment
If oil seeps into the ground, contaminated soil does not necessarily have to be excavated and disposed of. How on-site biological remediation works, how quickly it takes effect, and what is important when carrying it out.
Read more ↗
Accident
Our liquid oil binders, FMO Road and FMO Water, meet environmental and water protection requirements – ensuring safe use on road surfaces and in water bodies.
Read more ↗
Cleaning
Biotensides are surface-active substances of biological origin – made from 100 % natural raw materials rather than petrochemical feedstocks. Here you will find the key information on their manufacture, properties and applications.
Read more ↗GOOD TO GO WITH
Starter kits
10 litres of FMO water and a Gloria Prima 500 PLUS for manual application.
Starter kits
10 litres of FMO Strasse and a Gloria Prima 500 PLUS for occasional use.
Starter kits
10 litres of FMO Strasse and a Gloria Clean 500 for regular use.
Accessories
Pressurised sprayer with a 5-litre capacity for professional cleaning.
Accessories
A robust stainless-steel pressure sprayer for heavy-duty cleaning tasks.
Accessories
Pressure sprayer with EPDM seals, a plastic lance and an operating pressure of up to 3 bar.
Enquire without obligation. We’ll advise you personally.
For professional users only: We supply directly to businesses, fire brigades, ports, municipal depots and local authority organisations (B2B & B2A). Unfortunately, we are unable to process enquiries from private individuals.
