Oil spill clean-up
Cleaning concentrate containing biosurfactants for the machine-based removal of heavy oil stains – low dosage (0.5–3 per cent)
Item number 8836
PACKAGING & EQUIPMENT
10-litre jerrycans, 600-litre IBCs and 1,000-litre IBCs. Other container sizes available on request.
Personal advice · No-obligation quote · Direct from the manufacturer
AT A GLANCE
For the mechanical removal of heavy and extensive oil spills using oil spill clean-up vehicles.
0.5–3 per cent concentrate in the working solution in the cleaning vehicle.
The bio-surfactants it contains remove traces of oil; the treated surface is slip-resistant and fire-retardant.
According to DWA-M 715, liquid cleaning agents are a recognised method for removing oil from road surfaces.
FMO Strasse ST-BO is a cleaning concentrate containing biotensides, designed for the mechanical removal of heavy and extensive oil stains from road surfaces. It is used in low concentrations (0.5–3 per cent) in cleaning vehicles and can optionally be sprayed onto the oil stain for pre-treatment.
Application
Optionally, spray the oil mark with the prepared cleaning solution before machine cleaning and, depending on the severity, leave it to work for a short time. Fill the cleaning vehicle with FMO Strasse ST-BO (0.5–3 per cent) in accordance with the operating mode or the manufacturer’s specifications, and drive over the oil spill. Liquid cleaning agents are a recognised method for oil removal on traffic surfaces in accordance with DWA-M 715.
Effect
Suitable for hydrocarbons of synthetic, mineral, vegetable and animal origin, e.g. diesel, fuel, engine oil and hydraulic oil. The treated surface is slip-resistant and fire-retardant.
Safety
No CLP classification – no hazard pictograms.
Direct: The bio-surfactants contained in the product remove even heavy and extensive oil stains from the road surface at low dosages; the cleaning vehicle collects the dissolved oil along with the waste water. The cleaned surface is slip-resistant and fire-retardant.
Next: The oil is removed from the traffic area along with the dirty water and disposed of in accordance with local regulations.
We will send you the technical data sheet and safety data sheet by email on request.
Request data sheetsAPPLICATION
Pre-treatment (optional): Spray the oil mark with the cleaning solution (5–25 per cent) before machine cleaning and leave it to work for 1–15 minutes, depending on the severity. Removing oil marks: Fill the cleaning vehicle with FMO Strasse ST-BO (0.5–3 per cent) in accordance with the operating mode or the manufacturer’s specifications, and drive over the oil mark. Effective at water temperatures of 30–40 °C and above. Dispose of the collected dirty water in accordance with local regulations.
Dosage: from 0.5% – Pre-treatment (spraying): 5–25% concentrate in the working solution
We will advise you personally on dosage, packaging and quantity – and send you a no-obligation quote.
Product information
Cleaning
Biotensides are surface-active substances of biological origin – made from 100 % natural raw materials rather than petrochemical feedstocks. Here you will find the key information on their manufacture, properties and applications.
Read more ↗GOOD TO GO WITH
Starter kits
10 litres of FMO water and a Gloria Prima 500 PLUS for manual application.
Starter kits
10 litres of FMO Strasse and a Gloria Prima 500 PLUS for occasional use.
Starter kits
10 litres of FMO Strasse and a Gloria Clean 500 for regular use.
Accessories
Pressurised sprayer with a 5-litre capacity for professional cleaning.
Accessories
A robust stainless-steel pressure sprayer for heavy-duty cleaning tasks.
Accessories
Pressure sprayer with EPDM seals, a plastic lance and an operating pressure of up to 3 bar.
Enquire without obligation. We’ll advise you personally.
For professional users only: We supply directly to businesses, fire brigades, ports, municipal depots and local authority organisations (B2B & B2A). Unfortunately, we are unable to process enquiries from private individuals.
